+ 6 03 7954 9821


Camera platform

Cross Aisled 2.00w

Press platform

VIP platform


Pakar Grandstand can include Special Platform and Area to fulfill specific requirements. We can design and integrate:

  • Press Platform
  • VIP Platform
  • Camera Platform
  • Cross Aisle
  • Etc….

Contact us to learn more about the possibilities our Grandstand offers.


The Pakar Grandstand structure comprises a system of frames welded with interlocking system, ties, braces, beam & deck units that lock together to form a quick erect, structural support system. Frames with height of 1.00m are linked together to provide a support structure that have a slope of 250mm rise unto which the deck units are installed to provide a continuous terraced surface. 125mm, 375mm rise are also available. Seat Units and balustrade units are fixed to the terraced decks to provide a safe secure interlocking seating area.



Each Truss T4 support 4 rows of 4 seat spacing between rows is 750mm. Truss 3.00m length, hot dipped galvanized high tensile strength steel tube. The structure is fully welded to produce a rigid framework. Frames are inter-locked together horizontally .

Deck Units [Platform]

Deck units [platform] are made of 12mm thick anti-slip phenolic film faced-plywood. The plywood is supported and bolted on 3 units SHS 38mm x 38mm x 3mm thick. When installed in the grandstand, deck units are captive with the frame cleats and provided self-interlocking system.


They are constructed from hot dipped galvanized high tensile strength steel pipe diameter 48.3mm x 3.2mm with locking pins

Base Jacks

Base Jacks are constucted from 38mm diameter thick hot dipped galvanized steel bar with a base plate 150mm x 150mm x 6mm. Base Jacks may be incorporated to provide for a maximum total adjustment range of which ensures that the structure is capable of being used safely on virtually any ground contour.

Seat Units Steel framed seat units are fixed to the frame units with integral hooks and are locked onto the frame with a hidden locking bolt. The seat units when not in use are designed so that they nest intimately together to provide extremely compact storage. Seats are made of U.V. stabilized Polypropylene with bright and smooth appearance. 3 type of seats:


  • Bucket seat : clearway : 350mm; seat spacing 450mm 05r 500mm. Seat rest 360mm
  • Tip-Up seat : clearway : 500mm; seat spacing 500mm seat pans 410mm deep and 425mm wide seat rest : 400mm high and 425mm wide
  • VIP seat with armrest seat spacing 600mm

Balustrades and Safety Rails

Side balustrades are connected to the deck units and to the frame and are positioned to provide a barrier height of 1100mm above the deck level. Front and rear balustrades area connected to high-strength posts that are connected directly to the high-strength post. Imposed load of barriers : 1kN/m to 2kN/m.

    Aisles and Gangways

    Aisles and Gangways are generously proportioned to provide for clear unobstructed access. The access can be provided by front staircase, rear staircase, internal staircase or ramp. The modular Pakar Staircase get used to any ground conditions. Latest regulations concerning safety barriers, live load and guardrails load are met.